Cup Sleeve Series V-0.4
- Order number: F000784
- simple but chic design that resembles a drinking cup
- true to the original and with great attention to detail
- pronounced labia with clitoris
- detailed love tunnel with G-spot
- high quality from South Korea
- dimensions: 84x84x156mm
- weight: 480g
Discover and experience the exciting cup sleeve series from the brand manufacturer Naked Factory from South Korea
The Cup Sleeve series from the popular manufacturer Naked Factory is available in a total of eight different designs. Four variants with an anal love tunnel and another four variants with a vaginal pleasure tunnel. We are starting our European premiere with three models, of which there is an anal model and two vaginal models. We will then present the remaining five versions in spring 2024.
All sleeves were designed true to the original and with great attention to detail. The highlight of this series is that they visually resemble a drinking cup in which they are placed. Here the term “Caution Hot” takes on a whole new meaning. The material is pleasantly soft and of high quality. Just like you’re used to from Naked Factory.
The outer labia are very pronounced in this model and extend far outwards. The many small details can be seen particularly well here. You could almost think that you are looking at a real vagina. You can even see the clitoris a little bit, peeking out from under the clitoral hood.
The love tunnel was designed in 3D optics and welcomes your cock with differently arranged folds and projections. The many higher projections exert a particularly intense stimulus on your glans. A real pleasure to slowly penetrate and gently slide further and further back. The G-spot is also present, which can be found in the first third of the sleeve. Due to the countless bumps inside, the lubricant, which we recommend using, is distributed into the smallest cracks and ensures a moist and comfortable feeling, just like a real vagina.
Material
Product : TPR (TPE)
Cup and Lid : PET
Case : PP
Dimenstion : 95*95*170mm
Insertion length : 12cm (+/-1)
Before using for the first time
Please wash the product once with water after opening before using it for the first time. With regular use and regular washing, we recommend using Onahole Puder, to prevent the material from sticking.
You can simply rinse the toy with warm water to clean it. We recommend using a mild, pH-neutral soap for washing. If dirt remains inside, it can lead to mold and germs. A cleaning brush can be used to optimally remove all impurities. In this way you make sure that you really don't have any residues left in the internal structure.
Warming
Use hot water of 50 degrees or less to heat this product and warm it up. If you warm it in boiling water, cracks may appear. Please note that this applies to all products. We therefore recommend the Hole Warmer from Rends for optimal warming. This heats the onaholes to 37 degrees in just 10 minutes.
Use of lube
Please only use water-based lubricant. We recommend the Peace's Lotion, for example. Most gels are water-based, but some are oil-based or silicone-based. Using such an oil-based lotion may cause deterioration or damage to the masturbator.
Storage information
Ultraviolet rays cause the elastomer (material name of Onahoru) to deteriorate. Avoid direct sunlight when storing and store the toy in a cool and dark place.
About the life of the Onahoru
With regular use, the surface inside the masturbator will gradually wear away a little. This gives the surface a moderately rough texture and arouses complex stimuli. Your toy is not broken because of it. You can use it many more times without any problems and experience unimagined orgasms.
